Robo E4: Clearing a Tough Clog - Aka Taking the Extruder Apart

This video shows you how to take the extruder apart to get to the toughest clogs. Prior to following these steps, we recommend following the guidance in this article for basic unclogging steps: Robo E4: Unclogging / Replacing Your Extruder

Estimated time: 30 minutes

If your assembly won't come apart like it does in the above video, take a look at the video below. Sometime after we recorded the first one, our parts manufacturer added a set screw you need to remove to get the gears to detach from the assembly. You can see that part better in the video below. 

If the parts within the filament feeder fall out and need to be reassembled, this video will walk you through that process: