Robo E3 Firmware Update

Instructions for updating using internet:

This process is done on the printers' Touch Screen

Tap "Tools"

Tap "Setting"

Tap "right arrow > " to navigate to 2nd page

Tap "right arrow" to navigate to 3rd page

Select "Update" to update printer firmware.

Instructions for installation of new firmware (download at bottom of this article) using USB:

Files need to be placed in root directory of USB stick in FAT32 format

Please download the firmware from the attached.

Insert USB stick into computer
Open a file browser window and locate the USB drive in the left side panel
Right click the USB drive and click Format
Choose FAT32 for File System drop down menu, enter any name for Volume Label, check the Quick Format Box
Click Start
Open the USB drive
Copy the contents of the attached directly into the USB drive and ensure the files are not in any folder (in root directory)
Remove USB Stick from computer
Insert USB stick into Robo E3 printer front USB port while power is off
Turn printer on - installation will automatically begin
When installation is complete, turn printer off, then remove USB stick, and turn E3 back on