Loading and Unloading filament C2

Loading and Unloading Filament

Loading Filament

From the home screen select ‘Utilities’

Next, select ‘Wizards’

Select ‘Filament Loading Wizard’

After you printer heats up, ensure you’ve cut the tip of the filament. Place the filament inside the feed hole, and press ‘Next’.

The feeder gear will push your filament down, through the extruder, and out of the nozzle

Once you see filament coming out of the bottom of the nozzle, select ‘Next’ and ‘Finished’

Unloading Filament

1. From the home screen select ‘Utilities’
2. Next, select ‘Wizards’
3. Select ‘Filament Change Wizard’
4. After you printer heats up, the feeder gear will start to retract the filament from the nozzle
5. Once you see filament coming out of the top of the extuder, select ‘Next’ and ‘Finished’