Unboxing Robo C2

Unboxing Robo C2

Now that you’ve received your Robo C2, it’s time to unbox it and get familiar with your printer and accessories.

Your C2 is housed in 3 styrofoam pieces, secured together by a nylon strap. Simply lift the printer from the box using the strap and set it down.

Unclip the black nylon strap and remove the two halves of the top styrofoam shell.

Finally, using the handholds on the bottom of your C2, lift the printer out of the bottom styrofoam piece.

The printer’s accessories are stored in the inclusions box inside the printer. Simply slide the inclusion box out and be sure to remove the foam.

Now we are ready to take off the additional shipping material and zip ties. There are 4 orange rod holders that need to be taken off. Simply push on the clip and it will come off. There is one at each corner of the top gantry.

Next, remove the zip ties securing the rods to their plastic brackets