To begin loading filament, hang your filament spool on the spool holder. Be sure to unroll at least 11”— or 30 centimeters — of filament and thread it through the base of the filament sensor block and into the filament feed tube.
Continue feeding the filament through the filament feed tube until it reaches the extruder. Then, press the extruder lever arm down and feed the filament into the printer’s gears.
Now select UTILITIES on the touch screen.
Then select WIZARDS from the list.
Finally, select FILAMENT LOADING WIZARD.
Follow the on-screen prompts:
- Heating up the printer
- Ensuring you’ve cut off the tip of the filament
- Now, look for filament to exit the nozzle
- Press NEXT, and
- Press FINISHED