RoboSupport
- Total activity 640
- Last activity
- Member since
- Following 0 users
- Followed by 2 users
- Votes 6
- Subscriptions 327
Articles
Recent activity by RoboSupport Sort by recent activity-
Gantry clicking sound on Robo C2
C2 gantry clicking If you're experiencing a persistent clicking noise in your gantry when printing, follow this guide to install a 3d printable washer-type clip to go around the gantry rods. NOTE:...
Gantry clicking sound
R2 gantry clicking sound If you're experiencing a persistent clicking noise in your gantry when printing, follow this guide to install a 3D printable washer-type clip to go around the gantry rods. ...
Robo C2 Mainboard Wiring Diagram
Download Here
Robo R2 Mainboard Wiring Diagram
Download Here
Replacing the heater core and thermistor on your R1+ hotend
1. Follow the Quick Release Guide to remove the totend from the extruder assembly. 2. Unscrew the heatercore (red) and the thermistor (black) using an allen wrench. Then place them back into their ...
Installing New R1+ Heatbed (V2)
Follow these steps to install a replacement print bed on your R1+ printer. First, check to see if what version of the bed you have. If your bed cable does not have an exposed black connector as pi...
Replacing print bed V1 with V2
Replacing the R1+ print bed V1 with V2 Follow these steps to install a replacement print bed on your R1+ printer. First, check to see if what version of the bed you have. If the bed cable has an e...
Replacing C2 Hotend with old heater core and thermistor.
1. To begin replacing your hotend while keeping the old components follow this guide to start removing the hotend from your unit. Note: If your hotend does not have a heater core or thermistor alr...
Replacing R2 Hotend with old heater core and thermistor
1. To begin replacing your hotend while keeping the old components follow this guide to remove your hot end. Note: If your hotend does not have a heater core or thermistor already, skip to step 3. ...
Extruder motor malfunction
R1+ extruder motor malfunction If you find that your extruder motor is not turning when heated or during a print follow these steps to help you troubleshoot the problem. (For removal and installat...