RoboSupport
- Total activity 640
- Last activity
- Member since
- Following 0 users
- Followed by 2 users
- Votes 6
- Subscriptions 327
Articles
Recent activity by RoboSupport Sort by recent activity-
Motor turning but filament not moving
If you notice the extruder motor is turning but filament is not being driven through, your hobbed gear might be loose. Follow this guide to tighten your hobbed gear. NOTE: C2 is pictured, but the s...
Extruder not heating up
Hotend wires should be plugged into their correct ports on the underside of the extruder. The heater core is the red covered pair of wires, and the thermistor is the black pair of wires. Make sur...
Filament Latch Adjustment
Keeping the tensioner screws on the filament latch adjusted is important to prevent extruder clogs and filament breakage. The steps below will walk you through how to adjust your tensioner screws a...
R1+ RAMPS Board Wiring Diagram
Download here
Checking order status and tracking number
If you need to check your order status or tracking number for your recent order, follow these steps: 1) Log into your account at robo3d.com and click on the person icon in the top right corner of t...
How do I change my shipping address?
If your order hasn't been shipped yet, or you want to change or edit your shipping address, follow the steps below. 1) Log into your account on robo3d.com by clicking on the person icon on the top ...
Changing the starting printing temperature via the start gcode
Sometimes a question come across as "Why does my printer temperature not match my temperature that I set in my printing settings?". Don't worry, we have a solution below. The reason your printer he...
Clogged Extruder C2
Clogged Extruder on the C2 If you find that you cannot drive filament through your heated extruder, follow these steps. NOTE: An R2 is pictured, but the process is the same for the C2. 1. Start by...
Mod your C2 with a 3D printed fan duct
If you are wanting more air flow while printing with your Robo C2 or R2, follow this step-by-step guide to uninstall your stock fan duct, and install your shiny new 3D printed fan duct with no extr...
Gantry Alignment C2
C2 gantry alignment Please note: these pictures are from Robo R2 but the process and placement is the same for Robo C2. 1. Start by printing out four of these gantry alignment tools. Note that thes...