How to register and connect your Robo E3 Pro to MyStemKits website.
-
Create and turn on MyStemKits on the Robo E3 Pro Printer
- Make sure you are connected to the internet via wifi or ethernet cable.
- Connect via wifi by going to 'tools > settings'
- Once you are connected to the internet, go into 'tools > settings'
- Click on the down arrow to get to the next page of settings.
- Toggle on the 'MyStemKits' option to enable it.
- Make sure that the cloud icon is present after enabling.
- Now we need to go grab the registration token.
- Click on the 'back' arrow to go the the previous screen.
- Go to 'About'
- Look for the token next to the MyStemKits option about 3/4 the way down the page and remember this token.
- After you have this token, proceed to step 6
- Make sure you are connected to the internet via wifi or ethernet cable.
-
Go to www.mystemkits.com and login to your account.
- You can either add printers right from the dashboard or go into the 'printer management' tab.
- From the 'printer management' tab, click on 'register printer' in the top right hand corner
- On the popup window, look for the Robo logo towards the bottom, and click 'register'
- Enter the registration token from step 5.3 and press 'add'
- After a few moments, your printer will appear and you can rename it and start printing to it!
Comments
0 comments
Please sign in to leave a comment.