RoboSupport
- Total activity 640
- Last activity
- Member since
- Following 0 users
- Followed by 2 users
- Votes 6
- Subscriptions 327
Articles
Recent activity by RoboSupport Sort by recent activity-
Robo E3 Pro How-To Print from USB
How-to print from a USB on your Robo E3 Pro 3d printer Before you try to print from a USB drive, make sure that you have a .gx or .g file loaded onto the drive Printing from USB does not work ...
Connecting Robo E3 Pro to Robo Cloud
How-to connect Robo E3 Pro to Robo Cloud First, make sure you are connected to the internet via wifi or ethernet Retrieving the registration token From the main screen, go to 'tools > setti...
Connecting Robo E3 Pro to the Internet
Connecting Robo E3 Pro to the internet The best way to connect to the internet if via an ethernet cable. Otherwise, use wifi Connecting to Wifi Click on 'tools > settings' Click 'wifi' and i...
Robo E3 Pro Loading and Unloading Filament
How to Load and Unload filament on your Robo E3 Pro Go into 'tools > filament' From here, select whether you would like to load or unload filament If you don't have any filament loaded, skip t...
IR Sensor QC: Repeatability test
This article will explain how to perform a repeatability test on your printer's autolevel sensor. This test works for the R1, R2 and C2 printers; though you will need a different serial monitor to...
NewMatter Mod-T Support Documentation
If you are looking to get support for your New Matter Mod-T 3d printer, we have taken the initiative to create a new webpage that has all of the info you will need, as well as creating a support ti...
Precision Air Flow - Fan mount printed add on
Print cooling upgrade Note: This is an updated design to the printed fan duct Robo previously released, found here. The Precision Air Flow (PAF) printed fan duct modification provides better air fl...
Printing and Installing Filament Guide Tube Clips
PTFE Filament Guide Tube Clips provide your filament tube a secure location on your printer, and bring two guiding paths into one. Follow the simple step-by-step guide on printing and installing yo...
Error - EEPROM CRC Mismatch
Sometimes the printer firmware (Marlin) does not update correctly and results in the CRC mismatch error. This means that the Mainboard memory does not match what the firmware is expecting, occasio...
Error - Thermal Runaway
If your touchscreen ever displays a "Thermal Runaway" error as pictured below, follow this guide. This is an error that can be addressed through your cooling settings within the slicing program yo...