RoboSupport
- Total activity 640
- Last activity
- Member since
- Following 0 users
- Followed by 2 users
- Votes 6
- Subscriptions 327
Articles
Recent activity by RoboSupport Sort by recent activity-
Support or scaffolding
Support Enable support Enabling support will give your model a scaffolding underneath parts of the model that may need some support underneath their overhangs. Overhangs are part of your model w...
E3: Disassembling the Housing (Accessing the Screen/Main Board)
If you need to disassemble the plastic housing surrounding your Robo E3, this video will walk you through doing so. Please follow carefully as there are some hidden screws you don't want to miss. B...
Robo E4: Filament Guide Detached from Extruder Assembly
If your Robo E4 has the black filament guide detached from where it is supposed to connect to the extruder assembly, it typically indicates that a piece of plastic on the top of the extruder assemb...
My Robo E4 Pro 3D printer isn’t showing up after I add it to MyStemKits.
First things’ first – make sure you are following the correct how-to video. For the Robo E4 Pro, you do NOT need to download any software or “cloud client.” That is for other types of 3D printers...
E3 Pro: Replacing the Main Board
If you need to replace the main board on your Robo E3 Pro, this video will walk you through how to do so. Expect it to take 25 - 40 minutes to complete this process. You will need:2mm Allen Wrench#...
Connecting E3 to MyStemKits
Here we will walk you through how to connect your Robo E3 to the MyStemKits platform. Here is a video as well as step-by-step instructions No software download required! Just follow the simple ste...
Printer settings
Editing your printer settings Once you've selected your printer from the dashboard, find the Settings tab to edit printer settings. You can tap the title of each section to show the rest of the det...
Removing the print
Removing the print from the R1+ print bed When the print is complete and cooled down, use the provided spatula to carefully remove the print at its borders. Then, slowly work your way underneath th...
Removing your first print
Removing your first print from the R1+ When the test print is complete and cooled down, use the provided spatula to carefully remove the print at its borders. Then, slowly work your way underneath ...
Platform adhesion
Platform Adhesion Brim Using a brim adds a single layer around your object, fused to the outline of your model to improve adhesion to the bed and prevent warping. A brim is very useful for model...