RoboSupport
- Total activity 640
- Last activity
- Member since
- Following 0 users
- Followed by 2 users
- Votes 6
- Subscriptions 327
Articles
Recent activity by RoboSupport Sort by recent activity-
RoboPrint Deep Dive
Find out how to print to your Robo printers using RoboPrint. RoboPrint only works with the following models of Robo printer. Robo E3 Robo E3 Pro Robo E4 Robo E4 Pro If you have a different model,...
Robo E4 Pro: Sensor Calibration
Make sure you complete Z-Axis Calibration prior to doing Sensor Calibration. That article is available here: Robo E4 Pro: Z-Axis Calibration Tools/Calibration/Sensor Calibration Rotate the indica...
Robo E4: Calibration
If you need to re-calibrate your Robo E4, this video will show you how to do so. You may need to re-calibrate because you have replaced the nozzle or build plate or you have moved your printer to a...
Printing on your Robo E3 Pro Using RoboCloud
How-to connect Robo E3 Pro to Robo Cloud First, make sure you are connected to the internet via wifi or ethernet Retrieving the registration token From the main screen, go to 'tools > setti...
E3 Pro Clogged Nozzle & Replacing the Nozzle
You may follow the pictures/text instructions or the attached video. This video walks you through various troubleshooting steps for a clogged nozzle on your Robo E3 Pro. You may not need to follow...
Robo E3 Pro Quick Start Guide / Unboxing
Unboxing quick start video: Table of ContentsKey TermsAbout Robo E3 ProInside the BoxUnpackingAssembly and Set-UpLoading FilamentLevelingPrintingBuildWiFi & Cloud Printing This quick start guide i...
Whats in the Box?
Extrusion - Filament Grinding
Extrusion - Filament Grinding Extrusion doesn’t just depend on heat. There are a few other factors that can keep your extruder from working: Tangled Filament If the filament on your spool for some...
Cleaning the hobbed bolt (filament feeder gear)
Cleaning the hobbed bolt on the R1+ Steps to clean your filament feeder gear are outlined below. First, turn off your machine. Then unscrew the tension screws on the filament thumb latch so it can ...
Adjusting temperatures
Adjusting temperatures on the R1+ You can either click the PREHEAT button to preheat the print to a default temperature of 210°C, or create your own presets by clicking the pencil icon next to Extr...