RoboSupport
- Total activity 640
- Last activity
- Member since
- Following 0 users
- Followed by 2 users
- Votes 6
- Subscriptions 327
Articles
Recent activity by RoboSupport Sort by recent activity-
Printing over Wi-Fi using RoboPrint to One or Multiple Printers
RoboPrint can be used with USB or Wi-Fi. The Getting Started with RoboPrint video shows the USB option but if you need to print wirelessly, simply go into Tools/Multi-Machine Control. From this int...
Robo E3 Pro - Filament Check Error
This video provides guidance on how to fix the Filament Check error happening when filament is loaded into your Robo E3 Pro but isn't being correctly sensed by the sensor. It includes troubleshooti...
Robo E4: I'm having a really hard time removing my print from the build plate.
This 1-minute silent video shows you a few tricks you can try to help remove a stuck-on print. 1. Flex Plate & Use Scraper2. Slide Dental Floss Under the Print (This works best on prints with a so...
Why am I unable to change my printer selection? The options are greyed out.
This happens when you are wirelessly connected to one of your 3D printers. To select a different type of 3D printer, first, go into Print and then select the “Disconnect All Connections” option. T...
Robo E4 Pro: Unclogging / Replacing Your Extruder
The below video walks you through a variety of troubleshooting steps you can go through should you experience a clog in your Robo E4 Pro extruder, including replacing either the Nozzle (2:51) or th...
Robo E4 Pro: Connecting to the Internet
Find out the different ways you can connect your Robo E4 Pro to the Internet in this how-to video. Ethernet To connect to the internet using an ethernet cable, simply plug one end of your cable in...
Robo E4: Connecting to the Internet
Ethernet:To connect to the internet using an ethernet cable, simply plug one end of your cable into the ethernet cable slot on the back of your Robo E4 and the other into a working router or ethern...
Robo E3 Calibration
Tap "Tools" Tap "Setting" Tap "Calibration" To calibrate the initial distance between extruder and platform. After homing completed, slide a piece of paper continuously back and forth betwee...
Robo E3 Replacing Extruder Nozzle
First, make sure you have unloaded any filament that might still be in the extruder nozzle. After filament is unloaded, locate the two black buttons on the extruder Press them firmly inward P...
Print Not Sticking to Bed
Print Not Sticking to Bed If you are experiencing problems with the plastic not adhering to your print bed, there are a few things that can be done; Clean the build plate After some time, the buil...