RoboSupport
- Total activity 640
- Last activity
- Member since
- Following 0 users
- Followed by 2 users
- Votes 6
- Subscriptions 327
Articles
Recent activity by RoboSupport Sort by recent activity-
Replacing your Robo C2 hotend
Replacing your Hotend Nozzle Follow these steps to remove your hotend nozzle 1. Make sure to turn your Robo C2 off, and unplug the power cord from the back of the machine. 2. Remove the magnetic ex...
Cleaning the Robo C2 print bed surface
Cleaning the print bed surface The Robo C2 print bed surface is a sheet of black painters tape. Make sure to clean it with rubbing alcohol to ensure your print sticks to its surface. After 15 or 2...
Lubricating the axis
Lubricating the axis NOTE: An R2 is pictured, but the extruder components and lead screw should be serviced in the same way. There are two types of linear rods, and two types of bearings in Robo R...
Cleaning the feeder gear
Cleaning the feeder gear 1. First turn off your machine and remove the extruder cover. 2. Next, unscrew the extruder tensioner arm cover with a screwdriver. 3. Take the allen wrench that came in...
Print Check list Robo C2
Be sure to check for the following before every print: Make sure the print bed is free of any/all objects Make sure nothing is blocking the extruder head from moving freely around the build area...
Updating your Robo C2
Updating Your Printer Make sure to update your printer to grab the benefits of all the latest Robo has to offer, as well as making sure your Robo C2 performs to the best of its ability. Select “...
Setting up Wi-Fi
Setting Up Wifi To begin connecting to your Wi-Fi network, Select ‘Utilities’ on home screen. Select ‘Network’. Select ‘Configure WIFI’. Then select your Wi-Fi network and use the on-scre...
Removing the print C2
Removing the print When the Print is completed, remove the print plate with the finished print on it from the C2 by lifting the bed up and away from the magnets. Slowly slide the print bed out o...
Using print bed adhesion
Using print bed adhesion The Robo C2 has a print bed adhesion tape already installed with your printer. These will usually last about 10-30 prints depending on the model you print on it. In orde...
Print Status
Print Status There are three ways to check on the status of your print while your Robo C2 is at work printing away Screen While your Robo C2 is printing, you can simply check the status by selec...