My new robo1+ printer is printing off center in the Y axis. Just over 22mm and biased toward the back of the glass. I spoke with level 2 help and they said this is normal. I then asked about the heating pad and they said it should be printing in the center of the heating pad. Well, as it turns out, the heating pad is biased in the opposite direction about 27mm So on larger prints the part is being printed on cold glass. Two inches of it. I guess I could offset every print in the software but I would rather not do that. How can I move the heating pad to the center of the glass and then adjust the homing switch so that everything is centered?
Please sign in to leave a comment.